Review Questions Jointer and Planer

Review Questions

1. What part of the jointer can be adjusted to plane a bevel?
2. What are three different operations of the jointer?
3. When operation on the jointer requires the guard to be removed?
4. What must be done prior to making adjustments on the jointer?
5. Define/describe the following terms:

1. Facing
2. Jointing

6. What determines the maximum width a planer can accommodate?
7. The shortest length of stock a planer can cut is (multiple choice):

1. Twice the width of the table
2. Twice the distance between the pressure bar and the chip breaker
3. Twice the distance between infeed and outfeed rollers
4. Length of the table

8. The wider the stock, the (thinner/thicker) the cut.
9. When planing a cupped board, should the cup be up or down?
10. What other piece of machinery must be used with a planer?
11. What should be done if a piece gets stuck in the planer?